Packging & Delivery
Min Order1 piece
Briefing
Detailed
Function optimization :
it adopts integral coupling assembly, which can reduce the elastic shaft couplings power consumption ,noise and abrasion ,thus increasing efficiency. The rotor is made through extensively researching and three-dimensional CAD ,with higher efficiency ,minimum sliding and service life .
The character of cam and rotor transfer pump :
* .compare with centrifugal pump (pump milk) : centrifugal pump because of its simple structure, low cost and has been widely used. There are some main distinguish between them : a) cam and rotor pump belongs to Volume Pump ,the transfer flow can be controlled precisely or can be made to variable capacity pump easily . And the outlet flow is beyond the control of the centrifugal pump, with the decline in the increase of resistance cam and rotor pump has strong self-priming power , and the centrifugal pump should be full of water before operation .
b) speed of cam and rotor pump revolution is low, generally between 200rpm to 600rpm. Output materials has been steadily delivered and its components will not be destroyed . And high speed centrifugal pumps, the delivery of materials subject to powerful centrifugal force of the impact and role Therefore, it always happens that Component differs when centrifugal pump deliveries. And cam and rotor transfer pump is the best choice to solve this problem. So it is particularly applicable to transfer Blend material and even mixture of solid particles.
c) cam and rotor transfer pump can be used for the transmission of high viscosity material, known as colloidal pump. And centrifugal pump could not.
d) cam and rotor transfer pump can manufactured the variety
with higher pressure such as 1.5MPa. It is suitable for long-distance transport or high resistance transport t.
e) cam and rotor transfer pump used to produce more complex precision, high cost, it is also the greatest disadvantage compared with the centrifugal pump.
* , compare with screw pump (MC Pump) : Both are Volume Pump Therefore, their performance is similar which can transfer high-viscosity material with higher transportation pressure. But the greatest flaw of screw pump makes its unavailable for occasion of Hygiene requirements . The flaw is that the Worn out of screw-sculptured surfaces covered fluorine and Rubber material , It is likely to cause transfer material damaged by pollution. And for Streamline basic structure and no dead spots and non-metallic pieces of cam and rotor transfer pump ,so strictly speaking ,in food and beverages, pharmaceutical, and other industries with high health requirements, cam and rotor transfer pump application Especially now degree of automation of the production line increasingly faster. Meanwhile more and more use of CIP-line (local) cleaning . This demonstrates that the use of pump selection transfer pump is important.
Application of pump rotor brief :
1. Beverage categories : dairy foods, latex, chocolate syrup, cheese wort, beer, soft drinks
2. Fruit concentrates : pudding, jam, jelly, tomato sauce 3. Paste products : fats and oils, etc.
4. : Facial cosmetics, deteBNSents, hair gel, aromatic oils, etc.
5. Drug categories : Extract, emulsion, etc. pills Pulp
6. Chemical Industry : dye, fat solvents, and polymer resin
Main Technical Parameter
NO. |
Model |
Delivery capacity per revolution (L) |
Suggested timing range (rpm) |
Corresponding flux (L/h) |
I,II Motor power(Kw) |
ⅢMotor power(Kw) |
Diameter of the tube (inlet and outlet) (mm) | |
1 |
BNSTRA-I-05 |
0.028 |
200-500 |
330-840 |
0.55 |
0.37 |
25 | |
2 |
BNSTRA -I-1 |
0.04 |
200-500 |
480-1200 |
0.55 |
0.37 |
25 | |
3 |
BNSTRA -I-2 |
0.075 |
200-400 |
900-1800 |
0.75 |
0.55 |
32 | |
4 |
BNSTRA -I-3 |
0.095 |
200-400 |
1140-2280 |
1.1 |
0.75 |
32 | |
5 |
BNSTRA -I-4 |
0.118 |
200-400 |
1400-2800 |
1.5 |
1.1 |
38 | |
6 |
BNSTRA -I-5 |
0.18 |
200-400 |
2000-4000 |
2.2 |
1.5 |
38 | |
7 |
BNSTRA -I-6 |
0.28 |
200-400 |
3000-6000 |
3 |
2.2 |
50 | |
8 |
BNSTRA -I-7 |
0.34 |
200-400 |
3600-7200 |
4 |
3 |
50 | |
9 |
BNSTRA -I-8 |
0.424 |
200-400 |
4500-9000 |
5.5 |
4 |
50 | |
10 |
BNSTRA -I-9 |
0.53 |
200-400 |
5700-11000 |
7.5 |
5.5 |
63.5 | |
11 |
BNSTRA -I-10 |
0.7 |
200-400 |
7000-14000 |
7.5 |
5.5 |
63.5 | |
12 |
BNSTRA -I-11 |
1.0 |
200-400 |
12000-24000 |
11 |
7.5 |
89 | |
13 |
BNSTRA -I-12 |
1.6 |
200-400 |
19000-38000 |
11 |
11 |
89 | |
14 |
BNSTRA -I-13 |
2.0 |
200-400 |
24000-48000 |
15 |
11 |
108 |
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.